Bitmain Antminer D3 19 GH/s X11 mod firmware 900w

Dettagli

Tipologia : Altro

Marca : Altro

Bitmain Antminer D3 con firmware Bliss che permette di ottenere lo stesso hashrate ma con consumi e rumorosità nettamente inferiori all'originale ( 1200w 80/85db)
Attualmente la macchina in oggetto mi permette di ottenere circa 0.0015 Bitcoin (20?) al giorno utilizzando la pool zpool.ca.
Con il firmware Bliss si possono ottenere prestazioni di oltre 25/26 GH/s

Caratteristiche originali:

Hash rate: 19.3 GH/s (Variation of ±5% is expected)
Power consumption: 1200W (at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temp)
Hashing algorithm: X11 (Dash and many others)
Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. It recommends use of the APW3++ PSU with the Antminer D3. One APW3++ PSU can not power more than one Antminer D3All PCIe connectors on a hashing board need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply

Per qualsiasi domanda inerente alla vendita contattatemi pure

Pagamento in contanti, PayPal (+3%), bonifico bancario
Spedizione: in Italia e consegna a mano